Grouts

A dry powder that readily dissolves in water to produce a low viscosity grout solution. When the catalyst is added to the grout mixture, its viscosity and soil penetration are similar to water. When injected into soil and cured, it binds the soil particles together and forms a stiff, impermeable gel thereby controlling the flow of groundwater.

I & I Guard^®-PRF is a two-part polyurethane grout used to stop high-flow infiltration. It has an easy injection method creating a curtain of grout on the outside of underground structures. Super-fast cure allows for immediate reduction in infiltration. It’s best when used in conjunction with Quadex^® Repair Materials rehab systems.

I & I Guard^®-SSF is a high density, high strength, structural two-part polyurethane grout. This closed cell polyurethane’s low viscosity and hydro insensitive nature allows for permeation filling voids, undersealing concrete, and stabilizing soil while also mitigating inflow and infiltration.

A single component, moisture-activated and MDI/TDI blended polyurethane injection grout designed for sealing persistent water leaks from large cracks or leaking joints in concrete structures. Absorbs up to 12x its weight in water. Foam consistency, 1:1 water ratio. Gel consistency, 10:1 water ratio.

Quadex I & I Guard^®-MSF (Soil Stabilization Foam) is a low-viscosity, polyurethane injection resin, designed to stabilize soil. When mixed with catalyst and injected, it migrates through loose soil and into below-grade voids. As it comes into contact with moisture in the soil, I & I Guard-MSF reacts and expands to form a rigid foam. The foam encapsulates loose soil, fills voids, and forms a solid, watertight barrier.

Parson Quick Plug is a hydraulic cement material that is mixed with clean, potable water to produce an extremely rapid setting plug. It is inserted into prepared areas to stop active leaks under low to moderate pressure. Parson Quick Plug may also be used for repairing cracks in concrete. It is ideal for sealing around pipes and conduits. It is non-corrosive and produces extremely high strengths.

Hydro Grout is a low viscosity, polyurethane injection resin, designed to stabilize soil. When mixed with catalyst and injected, it migrates through loose soil and into belowgrade voids. As it comes into contact with moisture in the soil, Hydro Grout reacts and expands to form a rigid foam. The foam encapsulates loose soil, fills voids, and forms a solid, water-tight barrier.

Perma Seal is a single component, pre-catalyzed hydrophobic polyurethane grout that is extremely versatile and used for a variety of infrastructure rehabilitation applications. Its effectiveness and flexibility, making it an ideal solution for leak stoppage and crack sealing. This elastomeric polyurethane grout serves as a infiltration stop and is a viable method of sealing moving and non-moving cracks in concrete structures, slabs, vaults, tanks, and pipes.

Parson Seal-Tite is a moisture insensitive, two-component, fast-reacting hydrophobic polyurethane grout designed to stop high volume active leaks in manholes, pump stations and other wastewater structures. Parson Seal-Tite is packaged in a dual cartridge with a static mixer and is injected at or near the source of the leak, using a manual dual component caulk gun. The product contains no solvents, CFCs or HFCs.