SL100 is a 100% penetrating silane sealer. It is formulated to be a clear, breathable, long-lasting, 100% silane, water-repellent sealer to achieve the highest depth of penetration.
SL100 is a 100% penetrating silane sealer. It is formulated to be a clear, breathable, long-lasting, 100% silane, water repellent sealer to achieve the highest depth of penetration.
5 gallon (18.9 L) pails and 55 gallon (208 L) drums
250–400 ft2/gallon (6–10 m2/L)
Typical curing time for SL100 is 4–6 hours at 70°F (21°C) and 50% relative humidity. Cooler temperatures or higher relative humidity can extend the drying time.
Store in unopened containers in a clean, dry area between 35-110°F (2-43°C). Keep from freezing.
18 months when properly stored
Clean equipment with xylene.
Quadex® warrants this product to be free from manufacturing defects and to meet the technical properties, contained on the Technical Data Sheet, if used as directed within shelf life. Satisfactory results depend not only on quality products but also upon many factors beyond our control. The only remedy for the Purchaser for any claim concerning this product, including but not limited to, claims alleging breach of warranty, negligence, strict liability or otherwise, is the replacement of product or refund of the purchase price, at the sole option of Quadex.
Any claims concerning this product must be received in writing within one (1) year from the date of shipment. All further technical advice is based on Quadex’s present knowledge and experience. Quadex assumes no liability for providing such information and advice including the extent to which such information and advice may relate to existing third party intellectual property rights, especially patent rights, nor shall any legal relationship be created by or arise from the provision of such information and advice. Quadex reserves the right to make any changes according to technological progress or further developments.
The Purchaser must test the product for suitability for the intended application and purpose before proceeding with a full application. Performance of the product described herein should be verified by testing and carried out by qualified experts.