Hyperform® is a one-component, rapid-setting, high-early-strength patching material designed for repairing vertical and horizontal concrete and masonry structures.
Hyperform® Rapid-Set Patching Material
Description
Hyperform® is a one component, rapid setting, high early strength patching material designed for repairing vertical and horizontal concrete and masonry structures.
Packaging
Hyperform is supplied in 60 lb. (27 kg.) poly-lined bags.
Yield
One 60-lb. bag of Hyperform will yield approximately .48 cu. ft. and will cover 11.5 sq. ft. at a 1/2 in. thickness.
Procedure
Prepare surface to be patched by removing all loose concrete by using an air or electric hammer. Next, sandblast or water blast surface to clean away all contaminants, such as oil, chemicals, or dust. Then rinse with potable water to remove all remaining dirt, sand and loose debris.
Mix Hyperform with clean potable water at a rate of 1.0 gallon per 60 pound bag. If needed, Hyperform can be extended with 3/8“ aggregate at a rate of 25 pounds per bag.
Warranty
Quadex® warrants its products to be free of defects in material and workmanship. Within one year from purchase, if any Quadex product is proven defective, Quadex will replace said product or refund its purchase price at Quadex’s sole discretion. Quadex’s obligation shall be limited solely to such replacement or refund. There are no other warranties by Quadex, expressed or implied. There is no warranty if Quadex products are used contrary to Quadex’s written directions.
Precautions
Avoid eye contact or prolonged contact with skin. Wash thoroughly after use. Persons using Hyperform should wear necessary eye protection, dust mask and rubber gloves. Read all product labels and technical literature.
