Factory Blended, High Strength, Calcium Aluminate Mortar
AluminaLiner®
NET WT. 60 LBS. (27.2 KGS.)
YIELD:
One 60 lb. (27.2 kg) bag of Quadex® AluminaLiner® mortar yields
approximately 0.48 ft3 (0.014 m3) and will cover 5.76 ft2 (0.54 m2) at a 1.0-inch (25.4 mm) thickness. Allowance for waste must be made and will reduce coverage accordingly.
APPLICATION INFORMATION:
Prepare the surface to be repaired by removing all unsound concrete, dirt, dust and other debris using high pressure water and air blast excess water with an oil free air compressor providing a clean, saturated, surface-dry and sound substrate. Mix Quadex AluminaLiner mortar, using Quadex approved mixing equipment, with approximately 0.80 to 1.00 gallons (3.03 to 3.79 liters) of potable water per 60 lb. (27.2 kg) bag. All of mixing water should be added to an approved mixing device first, the mixer should be started and Quadex AluminaLiner mortar added in a continuous manner. Apply Quadex AluminaLiner mortar, using Quadex approved spray equipment, by low-pressure spraying (shotcreting) on vertical or overhead surfaces in thicknesses of 0.50 to 3.0 inches (12.7 to 76.2 mm).
STORAGE, HANDLING AND SHELF LIFE:
Material is to be kept in a dry, climate-controlled location outside of the elements until use. When onsite, material is to be kept dry and sheltered from extreme temperatures. When kept in a climate controlled, dry environment material is expected to maintain physical properties for up to a year after production.
Curing should be done in accordance with current Manufacturer recommendations.
Quadex AluminaLiner mortar is a one-component, calcium aluminatebased mortar which is formulated for industrial and professional use only and must be kept out of the reach of children. Observe all precautions found in Safety Data Sheets (SDS). Read all product labels and technical literature carefully before using.
DANGER!
 |
 |
 |
Hazard Statement: Contact with wet mortar can burn eyes and skin. Permanent eye damage can result from eye contact. Dust from the dry material can cause severe irritation and possibly burns to the eyes and respiratory tract with coughing and nasal discharge. Repeated inhalation may cause cancer. Lung damage and possibly pulmonary edema can result from dust exposure. Skin contact may not cause immediate burning sensation.
Precautionary Statement: It is important to begin skin first-aid even if there is no immediate burning sensation. Repeated or prolonged skin contact may cause skin allergic reactions. Personnel responding to a spill of this material should wear appropriate personal protective equipment. If swallowed rinse mouth, do not induce vomiting. Immediately remove contaminated work clothing to prevent irritation. Rinse hair and skin with clean water. If inhalation occurs, move to fresh air. When handling, personal protective equipment including but not limited to as gloves, NIOSH-Approved dust respirator, safety glasses, steel toe boots and long sleeves should be worn at all times.
WARNING:
This product contains greater than 0.10% crystalline silica. Avoid breathing dust at all times. Always use a NIOSH-Approved dust respirator and use only with adequate ventilation to keep dust below permissible levels. Also contains cement and pozzolans. This product is injurious to eyes and may cause skin irritations. Avoid eye and skin contact, flush with clean water for at least 15 minutes. Consult a physician immediately. KEEP OUT OF THE REACH OF CHILDREN.
GeoKrete®
Structural, Corrosion Resistant, Environmentally Friendly Geopolymer Mortar
NET WT. 60 LBS. (27.2 KGS.)
YIELD:
One 60 lb. (27.2 kg) bag of Quadex® GeoKrete® geopolymer mortar yields approximately 0.45 ft3 (0.013 m3) and will cover 5.4 ft2 (0.50 m2) at a 1.0-inch (25.4 mm) thickness. Allowance for waste must be made and will reduce coverage accordingly.
APPLICATION INFORMATION:
Prepare the surface to be repaired by removing all unsound concrete, dirt, dust and other debris using high pressure water and air blast excess water with an oil free air compressor providing a clean, saturated, surface-dry and sound substrate. Mix Quadex GeoKrete geopolymer mortar, using Quadex approved mixing equipment, with approximately 0.49 to 0.59 gallons (1.85 to 2.23 liters) of potable water per 60 lb. (27.2 kg) bag. All of mixing water should be added to an approved mixing device first, the mixer should be started and Quadex GeoKrete geopolymer mortar added in a continuous manner. Apply Quadex GeoKrete geopolymer mortar, using Quadex approved spray equipment, by low-pressure spraying (shotcreting) on vertical or overhead surfaces in thicknesses of 0.50 to 3.0 inches (12.7 to 76.2 mm).
NET WT. 20 KG
YIELD:
One 20 kg (44.09 lb.) bag of Quadex® GeoKrete®-RS geopolymer mortar yields approximately 0.014 m3 (0.48 ft3) and will cover 0.53 m2 (5.73 ft2) at a 25.4 mm (1.0-inch) thickness. Allowance for waste must be made and will reduce coverage accordingly.
APPLICATION INFORMATION:
Prepare the surface to be repaired by removing all unsound concrete, dirt, dust and other debris using high pressure water and air blast excess water with an oil free air compressor providing a clean, saturated, surface-dry and sound substrate. Mix Quadex GeoKrete geopolymer mortar, using Quadex approved mixing equipment, with approximately 1.53 to 1.87 liters (0.40 to 0.49 gallons) of potable water per 20 kg (44.09 lb.) bag. All of mixing water should be added to an approved mixing device first, the mixer should be started and Quadex GeoKrete geopolymer mortar added in a continuous manner. Apply Quadex GeoKrete geopolymer mortar, using Quadex approved spray equipment, by low-pressure spraying (shotcreting) on vertical or overhead surfaces in thicknesses of 12.7 to 76.2 mm (0.50 to 3.0 inches).
STORAGE, HANDLING AND SHELF LIFE:
Material is to be kept in a dry, climate-controlled location outside of the elements until use. When onsite, material is to be kept dry and sheltered from extreme temperatures. When kept in a climate controlled, dry environment material is expected to maintain physical properties for up to a year after production.
Curing should be done in accordance with current Manufacturer recommendations.
Quadex GeoKrete geopolymer mortar is a factory blended, one-component (just add water), eco-friendly, micro-fiber reinforced geopolymer mortar which is formulated for industrial and professional use only and must be kept out of the reach of children. Observe all precautions found in Safety Data Sheets (SDS). Read all product labels and technical literature carefully before using.
DANGER!
|
|
|
Hazard Statement: Contact with wet mortar can burn eyes (H318) and skin (H317). Permanent eye damage can result from eye contact. Dust from the dry material can cause severe irritation and possibly burns to the eyes and respiratory tract with coughing and nasal discharge. Repeated inhalation may cause cancer. Lung damage and possibly pulmonary edema can result from dust exposure. Skin contact may not cause immediate burning sensation.
Precautionary Statement: It is important to begin skin first-aid even if there is no immediate burning sensation. Repeated or prolonged skin contact may cause skin allergic reactions. Personnel responding to a spill of this material should wear appropriate personal protective equipment. If swallowed rinse mouth, do not induce vomiting. Immediately remove contaminated work clothing to prevent irritation. Rinse hair and skin with clean water. If inhalation occurs, move to fresh air. When handling, personal protective equipment including but not limited to as gloves, NIOSH-Approved dust respirator, safety glasses, steel toe boots and long sleeves should be worn at all times.
WARNING:
This product contains greater than 0.10% crystalline silica. Avoid breathing dust at all times. Always use a NIOSH-Approved dust respirator and use only with adequate ventilation to keep dust below permissible levels. Also contains cement and pozzolans. This product is injurious to eyes and may cause skin irritations. Avoid eye and skin contact, flush with clean water for at least 15 minutes (P305+P351+P338). Consult a physician immediately. KEEP OUT OF THE REACH OF CHILDREN (P102). Disposal: Dispose of contents/container in accordance with local/national regulations (P501).
GeoKrete®-RS
Rapid Setting, High Strength, and Corrosion Resistant Geopolymer Mortar
NET WT. 20 KG
YIELD:
One 20 kg (44.09 lb.) bag of Quadex® GeoKrete®-RS geopolymer mortar yields approximately 0.014 m3 (0.48 ft3) and will cover 0.53 m2 (5.73 ft2) at a 25.4 mm (1.0-inch) thickness. Allowance for waste must be made and will reduce coverage accordingly.
APPLICATION INFORMATION:
Prepare the surface to be repaired by removing all unsound concrete, dirt, dust and other debris using high pressure water and air blast excess water with an oil free air compressor providing a clean, saturated, surface-dry and sound substrate. Mix Quadex GeoKrete-RS geopolymer mortar, using Quadex approved mixing equipment, with approximately 2.6 – 3.2 liters (0.68 – 0.84 gallons) of potable water per 20 kg (44.09 lb.) bag. All of mixing water should be added to an approved mixing device first, the mixer should be started and Quadex GeoKrete-RS geopolymer mortar added in a continuous manner. Apply Quadex GeoKrete-RS geopolymer mortar, using Quadex approved spray equipment, by low-pressure spraying (shotcreting) on vertical or overhead surfaces in thicknesses of 12.7 to 76.2 mm (0.50 to 3.0 inches).
STORAGE, HANDLING AND SHELF LIFE:
Material is to be kept in a dry, climate-controlled location outside of the elements until use. When onsite, material is to be kept dry and sheltered from extreme temperatures. When kept in a climate controlled, dry environment material is expected to maintain physical properties for up to a year after production.
Curing should be done in accordance with current Manufacturer recommendations.
Quadex GeoKrete-RS geopolymer mortar is a factory blended, one- component (just add water), eco-friendly, micro-fiber reinforced geopolymer mortar which is formulated for industrial and professional use only and must be kept out of the reach of children. Observe all precautions found in Safety Data Sheets (SDS). Read all product labels and technical literature carefully before using.
DANGER!
|
|
|
Hazard Statement: Contact with wet mortar can burn eyes (H318) and skin (H317). Permanent eye damage can result from eye contact. Dust from the dry material can cause severe irritation and possibly burns to the eyes and respiratory tract with coughing and nasal discharge. Repeated inhalation may cause cancer. Lung damage and possibly pulmonary edema can result from dust exposure. Skin contact may not cause immediate burning sensation.
Precautionary Statement: It is important to begin skin first-aid even if there is no immediate burning sensation. Repeated or prolonged skin contact may cause skin allergic reactions. Personnel responding to a spill of this material should wear appropriate personal protective equipment. If swallowed rinse mouth, do not induce vomiting. Immediately remove contaminated work clothing to prevent irritation. Rinse hair and skin with clean water. If inhalation occurs, move to fresh air. When handling, personal protective equipment including but not limited to as gloves, NIOSH-Approved dust respirator, safety glasses, steel toe boots and long sleeves should be worn at all times.
WARNING:
This product contains greater than 0.10% crystalline silica. Avoid breathing dust at all times. Always use a NIOSH-Approved dust respirator and use only with adequate ventilation to keep dust below permissible levels. Also contains cement and pozzolans. This product is injurious to eyes and may cause skin irritations. Avoid eye and skin contact, flush with clean water for at least 15 minutes (P305+P351+P338). Consult a physician immediately. KEEP OUT OF THE REACH OF CHILDREN (P102). Disposal: Dispose of contents/container in accordance with local/national regulations (P501).
GeoKrete® Storm
Structural, Corrosion Resistant, Environmentally Friendly Geopolymer Mortar for Storm Sewer Applications
NET WT. 50 LBS. (22.7 KGS.)
YIELD:
One 50 lb. (22.7 kg) bag of Quadex® GeoKrete®-Storm geopolymer mortar yields approximately 0.38 ft3 (0.011 m3) and will cover 4.5 ft2 (0.42 m2) at a 1.0-inch (25.4 mm) thickness. Allowance for waste must be made and will reduce coverage accordingly.
APPLICATION INFORMATION:
Prepare the surface to be repaired by removing all unsound concrete, dirt, dust and other debris using high pressure water and air blast excess water with an oil free air compressor providing a clean, saturated, surface-dry and sound substrate. Mix Quadex GeoKrete-Storm geopolymer mortar, using Quadex approved mixing equipment, with approximately 0.58 – 0.83 gallon (2.2 to 3.2 liters) of potable water per 50 lb. (22.7 kg) bag. All of mixing water should be added to an approved mixing device first, the mixer should be started and Quadex GeoKrete-Storm geopolymer mortar added in a continuous manner. Apply Quadex GeoKrete-Storm geopolymer mortar, using Quadex approved spray equipment, by low-pressure spraying (shotcreting) on vertical or overhead surfaces in thicknesses of 0.50 to 3.0 inches (12.7 to 76.2 mm).
NET WT. 60 LBS. (27.2 KGS.)
YIELD:
One 60 lb. (27.2 kg) bag of Quadex® GeoKrete® geopolymer mortar yields approximately 0.45 ft3 (0.013 m3) and will cover 5.4 ft2 (0.50 m2) at a 1.0-inch (25.4 mm) thickness. Allowance for waste must be made and will reduce coverage accordingly.
APPLICATION INFORMATION:
Prepare the surface to be repaired by removing all unsound concrete, dirt, dust and other debris using high pressure water and air blast excess water with an oil free air compressor providing a clean, saturated, surface-dry and sound substrate. Mix Quadex GeoKrete geopolymer mortar, using Quadex approved mixing equipment, with approximately 0.49 to 0.59 gallons (1.85 to 2.23 liters) of potable water per 60 lb. (27.2 kg) bag. All of mixing water should be added to an approved mixing device first, the mixer should be started and Quadex GeoKrete geopolymer mortar added in a continuous manner. Apply Quadex GeoKrete geopolymer mortar, using Quadex approved spray equipment, by low-pressure spraying (shotcreting) on vertical or overhead surfaces in thicknesses of 0.50 to 3.0 inches (12.7 to 76.2 mm).
STORAGE, HANDLING AND SHELF LIFE:
Material is to be kept in a dry, climate-controlled location outside of the elements until use. When onsite, material is to be kept dry and sheltered from extreme temperatures. When kept in a climate controlled, dry environment material is expected to maintain physical properties for up to a year after production.
Curing should be done in accordance with current Manufacturer recommendations.
Quadex GeoKrete geopolymer mortar is a factory blended, one-component (just add water), eco-friendly, micro-fiber reinforced geopolymer mortar which is formulated for industrial and professional use only and must be kept out of the reach of children. Observe all precautions found in Safety Data Sheets (SDS). Read all product labels and technical literature carefully before using.
DANGER!
|
|
|
Hazard Statement: Contact with wet mortar can burn eyes and skin. Permanent eye damage can result from eye contact. Dust from the dry material can cause severe irritation and possibly burns to the eyes and respiratory tract with coughing and nasal discharge. Repeated inhalation may cause cancer. Lung damage and possibly pulmonary edema can result from dust exposure. Skin contact may not cause immediate burning sensation.
Precautionary Statement: It is important to begin skin first-aid even if there is no immediate burning sensation. Repeated or prolonged skin contact may cause skin allergic reactions. Personnel responding to a spill of this material should wear appropriate personal protective equipment. If swallowed rinse mouth, do not induce vomiting. Immediately remove contaminated work clothing to prevent irritation. Rinse hair and skin with clean water. If inhalation occurs, move to fresh air. When handling, personal protective equipment including but not limited to as gloves, NIOSH-Approved dust respirator, safety glasses, steel toe boots and long sleeves should be worn at all times.
WARNING:
This product contains greater than 0.10% crystalline silica. Avoid breathing dust at all times. Always use a NIOSH-Approved dust respirator and use only with adequate ventilation to keep dust below permissible levels. Also contains cement and pozzolans. This product is injurious to eyes and may cause skin irritations. Avoid eye and skin contact, flush with clean water for at least 15 minutes. Consult a physician immediately. KEEP OUT OF THE REACH OF CHILDREN.
Hyperform®
Rapid-Setting Patching Material
NET WT. 50 LBS. (22.7 KGS.)
YIELD:
One 50 lb. plastic pail of Hyperform will yield approximately 0.48 cu. ft.
APPLICATION INFORMATION:
Prepare surface to be patched by removing all loose concrete by using an air or electric hammer. Next, sandblast or water blast surface to clean away all contaminants, such as oil, chemicals, or dust. Then air-blast with oil-free compressed air to remove all water or loose sand. Mix Hyperform with clean potable water at a rate of 0.85 gallons per 50 lb. pail. If needed, Hyperform can be extended with 3/8” aggregate at a rate of 21 lb. per pail.
NET WT. 60 LBS. (27.2 KGS.)
YIELD:
One 60 lb. (27.2 kg) bag of Quadex® Hyperform® mortar yields approximately 0.48 cubic ft. and will cover 11.50 sq. ft. at a 0.50 inch thickness. Allowance for waste must be made and will reduce coverage accordingly.
APPLICATION INFORMATION:
Prepare the surface to be repaired by removing all unsound concrete, dirt, dust and other debris using high pressure water and air blast excess water with an oil free air compressor providing a clean, saturated, surface-dry and sound substrate. Mix Quadex Hyperform mortar with approximately 1.10 to 1.40 gallons of water per 60 lb. bag. All of mixing should be added to an approved mixing device first, the mixer should be started and Quadex Hyperform mortar added in a continuous manner. Hyperform can be extended with 3/8″ aggregate at a rate of 25 pounds per bag.
NET WT. 20 KG
YIELD:
One 20 kg (44.09 lb.) bag of Quadex® Hyperform® mortar yields approximately 0.010 m3 (0.35 ft3) and will cover 0.785 m2 (8.45 ft2). at a 12.5 mm (1/2 inch) thickness. Allowance for waste must be made and will reduce coverage accordingly.
APPLICATION INFORMATION:
Prepare the surface to be repaired by removing all unsound concrete, dirt, dust and other debris using high pressure water and air blast excess water with an oil free air compressor providing a clean, saturated, surface-dry and sound substrate.
Mix Quadex Hyperform mortar with approximately 2.55 to 2.85 liters (0.67 to 0.75 gallons) of water per 20 kg (44.09 lb.) bag. All of mixing water should be added to an approved mixing device first, the mixer should be started and Quadex Hyperform mortar added in a continuous manner.
Hyperform can be extended with 10mm (3/8″) aggregate at a rate of 8.5 kg (19.74 lb.) per bag.
STORAGE, HANDLING AND SHELF LIFE:
Material is to be kept in a dry, climate-controlled location outside of the elements until use. When onsite, material is to be kept dry and sheltered from extreme temperatures. When kept in a climate controlled, dry environment material is expected to maintain physical properties for up to a year after production.
Curing should be done in accordance with current ACI recommendations. Use a two-coat application of a quality water-based curing compound.
Quadex Hyperform mortar is a one-component, cement-based mortar which is formulated for industrial and professional use only and must be kept out of the reach of children. Observe all precautions found in Safety Data Sheets (SDS). Read all product labels and technical literature carefully before using.
Avoid eye contact or prolonged contact with skin. Wash thoroughly after use. Persons using Hyperform should wear necessary eye protection, dust mask and rubber gloves.
DANGER!
|
|
|
Hazard Statement: Contact with wet mortar can burn eyes (H318) and skin (H317). Permanent eye damage can result from eye contact. Dust from the dry material can cause severe irritation and possibly burns to the eyes and respiratory tract with coughing and nasal discharge. Repeated inhalation may cause cancer. Lung damage and possibly pulmonary edema can result from dust exposure. Skin contact may not cause immediate burning sensation.
Precautionary Statement: It is important to begin skin first-aid even if there is no immediate burning sensation. Repeated or prolonged skin contact may cause skin allergic reactions. Personnel responding to a spill of this material should wear appropriate personal protective equipment. If swallowed rinse mouth, do not induce vomiting. Immediately remove contaminated work clothing to prevent irritation. Rinse hair and skin with clean water. If inhalation occurs, move to fresh air. When handling, personal protective equipment including but not limited to as gloves, NIOSH-Approved dust respirator, safety glasses, steel toe boots and long sleeves should be worn at all times.
WARNING:
This product contains greater than 0.10% crystalline silica. Avoid breathing dust at all times. Always use a NIOSH-Approved dust respirator and use only with adequate ventilation to keep dust below permissible levels. Also contains cement and pozzolans. This product is injurious to eyes and may cause skin irritations. Avoid eye and skin contact, flush with clean water for at least 15 minutes (P305+P351+P338). Consult a physician immediately. KEEP OUT OF THE REACH OF CHILDREN (P102). Disposal: Dispose of contents/container in accordance with local/national regulations (P501).
QM-1s Restore®
Factory Blended, One Component, High Strength Cement Based Mortar
NET WT. 50 LBS. (22.7 KGS.)
YIELD:
One 50 lb. (22.7 kg) bag of Quadex® QM-1s Restore® mortar yields approximately 0.43 ft3 (0.012 m3) and will cover 5.10 ft2 (0.47 m2) at a 1.0-inch (25.4 mm) thickness. Allowance for waste must be made and will reduce coverage accordingly.
APPLICATION INFORMATION:
Prepare the surface to be repaired by removing all unsound concrete, dirt, dust and other debris using high pressure water and air blast excess water with an oil free air compressor providing a clean, saturated, surface-dry and sound substrate. Mix Quadex QM-1s Restore mortar, using Quadex approved mixing equipment, with approximately 0.58 to 0.83 gallons (2.21 to 3.16 liters) of potable water per 50 lb. (22.7 kg) bag. All mixing water should be added to an approved mixing device first, the mixer should be started and Quadex QM-1s Restore mortar added in a continuous manner. Apply Quadex QM-1s Restore mortar, using Quadex approved spray equipment, by low-pressure spraying (shotcreting) on vertical or overhead surfaces in thicknesses of 0.50 to 3.0 inches (12.7 to 76.2 mm).
NET WT. 60 LBS. (27.2 KGS.)
YIELD:
One 60 lb. (27.2 kg) bag of Quadex® QM-1s Restore® mortar yields approximately 0.51 ft3 (0.014 m3) and will cover 6.12 ft2 (0.57 m2) at a 1.0-inch (25.4 mm) thickness. Allowance for waste must be made and will reduce coverage accordingly.
APPLICATION INFORMATION:
Prepare the surface to be repaired by removing all unsound concrete, dirt, dust and other debris using high pressure water and air blast excess water with an oil free air compressor providing a clean, saturated, surface-dry and sound substrate. Mix Quadex QM-1s Restore mortar, using Quadex approved mixing equipment, with approximately .70 to 1.0 gallons (2.64 to 3.78 liters) of potable water per 60 lb. (27.2 kg) bag. All mixing water should be added to an approved mixing device first, the mixer should be started and Quadex QM-1s Restore mortar added in a continuous manner. Apply Quadex QM-1s Restore mortar, using Quadex approved spray equipment, by low-pressure spraying (shotcreting) on vertical or overhead surfaces in thicknesses of 0.50 to 3.0 inches (12.7 to 76.2 mm).
NET WT. 20 KG
YIELD:
One 20 kg (44.09 lb.) bag of Quadex® QM-1s Restore® mortar yields approximately 0.010 m3 (0.375 ft3) and will cover 0.42 m2 (4.50 ft2) at a 25.4 mm (1.0-inch) thickness. Allowance for waste must be made and will reduce coverage accordingly.
APPLICATION INFORMATION:
Prepare the surface to be repaired by removing all unsound concrete, dirt, dust and other debris using high pressure water and air blast excess water with an oil free air compressor providing a clean, saturated, surface-dry and sound substrate. Mix Quadex QM-1s Restore mortar, using Quadex approved mixing equipment, with approximately 2.40 to 2.55 liters (0.63 to 0.67 gallons) of potable water per 20 kg (44.09 lb.) bag. All mixing water should be added to an approved mixing device first, the mixer should be started and Quadex QM-1s Restore mortar added in a continuous manner. Apply Quadex QM-1s Restore mortar, using Quadex approved spray equipment, by low-pressure spraying (shotcreting) on vertical or overhead surfaces in thicknesses of 12.7 to 76.2 mm (0.50 to 3.0 inches).
STORAGE, HANDLING AND SHELF LIFE:
Material is to be kept in a dry, climate-controlled location outside of the elements until use. When onsite, material is to be kept dry and sheltered from extreme temperatures. When kept in a climate controlled, dry environment material is expected to maintain physical properties for up to a year after production.
Curing should be done in accordance with current ACI recommendations. Use a two-coat application of a quality water-based curing compound.
Quadex QM-1s Restore mortar is a one-component, Portland cement- based, high strength, fiber reinforced, shrinkage compensated mortar which is formulated for industrial and professional use only and must be kept out of the reach of children. Observe all precautions found in Safety Data Sheets (SDS). Read all product labels and technical literature carefully before using.
DANGER!
|
|
|
Hazard Statement: Contact with wet mortar can burn eyes and skin. Permanent eye damage can result from eye contact. Dust from the dry material can cause severe irritation and possibly burns to the eyes and respiratory tract with coughing and nasal discharge. Repeated inhalation may cause cancer. Lung damage and possibly pulmonary edema can result from dust exposure. Skin contact may not cause immediate burning sensation.
Precautionary Statement: It is important to begin skin first-aid even if there is no immediate burning sensation. Repeated or prolonged skin contact may cause skin allergic reactions. Personnel responding to a spill of this material should wear appropriate personal protective equipment. If swallowed rinse mouth, do not induce vomiting. Immediately remove contaminated work clothing to prevent irritation. Rinse hair and skin with clean water. If inhalation occurs, move to fresh air. When handling, personal protective equipment including but not limited to as gloves, NIOSH-Approved dust respirator, safety glasses, steel toe boots and long sleeves should be worn at all times.
WARNING:
This product contains greater than 0.10% crystalline silica. Avoid breathing dust at all times. Always use a NIOSH-Approved dust respirator and use only with adequate ventilation to keep dust below permissible levels. Also contains cement and pozzolans. This product is injurious to eyes and may cause skin irritations. Avoid eye and skin contact, flush with clean water for at least 15 minutes. Consult a physician immediately. KEEP OUT OF THE REACH OF CHILDREN.
DANGER!
|
|
|
Hazard Statement: Contact with wet mortar can burn eyes (H318) and skin (H317). Permanent eye damage can result from eye contact. Dust from the dry material can cause severe irritation and possibly burns to the eyes and respiratory tract with coughing and nasal discharge. Repeated inhalation may cause cancer. Lung damage and possibly pulmonary edema can result from dust exposure. Skin contact may not cause immediate burning sensation.
Precautionary Statement: It is important to begin skin first-aid even if there is no immediate burning sensation. Repeated or prolonged skin contact may cause skin allergic reactions. Personnel responding to a spill of this material should wear appropriate personal protective equipment. If swallowed rinse mouth, do not induce vomiting. Immediately remove contaminated work clothing to prevent irritation. Rinse hair and skin with clean water. If inhalation occurs, move to fresh air. When handling, personal protective equipment including but not limited to as gloves, NIOSH-Approved dust respirator, safety glasses, steel toe boots and long sleeves should be worn at all times.
WARNING:
This product contains greater than 0.10% crystalline silica. Avoid breathing dust at all times. Always use a NIOSH-Approved dust respirator and use only with adequate ventilation to keep dust below permissible levels. Also contains cement and pozzolans. This product is injurious to eyes and may cause skin irritations. Avoid eye and skin contact, flush with clean water for at least 15 minutes (P305+P351+P338). Consult a physician immediately. KEEP OUT OF THE REACH OF CHILDREN (P102). Disposal: Dispose of contents/container in accordance with local/national regulations (P501).
Quad-Plug®
Fast-Setting Cementitious Waterstop
NET WT. 50 LBS. (22.7 KGS.)
YIELD:
Quadex Quad-Plug will yield approximately 0.49 cu. ft.
APPLICATION INFORMATION:
TO SEAL RUNNING WATER AND SEEPAGE: Prepare crack or hole by chipping out loose material to a minimum depth and width of 3/4 inch with rubber gloved hand. Place a generous amount of dry Quadex Quad-Plug with a smooth fast motion to active leak, maintaining external pressure for 30 seconds. Repeat until leaks stops.
NET WT. 10 KG
YIELD:
Quadex Quad-Plug will yield approximately 0.0062 m3 (0.22 ft3).
APPLICATION INFORMATION:
TO SEAL RUNNING WATER AND SEEPAGE: Prepare crack or hole by chipping out loose material to a minimum depth and width of 1.9 cm (3/4 inch) with rubber gloved hand. Place a generous amount of dry Quadex Quad-Plug with a smooth fast motion to active leak, maintaining external pressure for 30 seconds. Repeat until leaks stops.
Quadex® Quad-Plug® is supplied in 50 lb. (22.7 kg.) plastic pails.
Quadex® Quad-Plug® is supplied in 10 kg (22.04 lb.) plastic pails.
Quadex warrants its products to be free of defects in material and workmanship. Quadex will replace any product proven to be defective when applied in accordance with manufacturer’s instructions. Quadex’s obligation shall be limited solely to such replacement. There are no other warranties by Quadex, expressed or implied.
Avoid eye contact or prolonged contact with skin. Wash thoroughly after use. Persons using Quadex Quad-Plug should wear eye protection, dust mask and rubber gloves. Read all product labels and technical literature.
DANGER!
|
|
|
Hazard Statement: Contact with wet mortar can burn eyes and skin. Permanent eye damage can result from eye contact. Dust from the dry material can cause severe irritation and possibly burns to the eyes and respiratory tract with coughing and nasal discharge. Repeated inhalation may cause cancer. Lung damage and possibly pulmonary edema can result from dust exposure. Skin contact may not cause immediate burning sensation.
Precautionary Statement: It is important to begin skin first-aid even if there is no immediate burning sensation. Repeated or prolonged skin contact may cause skin allergic reactions. Personnel responding to a spill of this material should wear appropriate personal protective equipment. If swallowed rinse mouth, do not induce vomiting. Immediately remove contaminated work clothing to prevent irritation. Rinse hair and skin with clean water. If inhalation occurs, move to fresh air. When handling, personal protective equipment including but not limited to as gloves, NIOSH-Approved dust respirator, safety glasses, steel toe boots and long sleeves should be worn at all times.
WARNING:
This product contains greater than 0.10% crystalline silica. Avoid breathing dust at all times. Always use a NIOSH-Approved dust respirator and use only with adequate ventilation to keep dust levels below permissible levels. Also contains cement and pozzolans. This product is injurious to eyes, and may cause skin irritations. Avoid eye and skin contact, flush with clean water for at least 15 minutes. Consult a physician immediately. KEEP OUT OF REACH OF CHILDREN.
DANGER!
|
|
|
Hazard Statement: Contact with wet mortar can burn eyes (H318) and skin (H317). Permanent eye damage can result from eye contact. Dust from the dry material can cause severe irritation and possibly burns to the eyes and respiratory tract with coughing and nasal discharge. Repeated inhalation may cause cancer. Lung damage and possibly pulmonary edema can result from dust exposure. Skin contact may not cause immediate burning sensation.
Precautionary Statement: It is important to begin skin first-aid even if there is no immediate burning sensation. Repeated or prolonged skin contact may cause skin allergic reactions. Personnel responding to a spill of this material should wear appropriate personal protective equipment. If swallowed rinse mouth, do not induce vomiting. Immediately remove contaminated work clothing to prevent irritation. Rinse hair and skin with clean water. If inhalation occurs, move to fresh air. When handling, personal protective equipment including but not limited to as gloves, NIOSH-Approved dust respirator, safety glasses, steel toe boots and long sleeves should be worn at all times.
WARNING:
This product contains greater than 0.10% crystalline silica. Avoid breathing dust at all times. Always use a NIOSH-Approved dust respirator and use only with adequate ventilation to keep dust below permissible levels. Also contains cement and pozzolans. This product is injurious to eyes and may cause skin irritations. Avoid eye and skin contact, flush with clean water for at least 15 minutes (P305+P351+P338). Consult a physician immediately. KEEP OUT OF THE REACH OF CHILDREN (P102). Disposal: Dispose of contents/container in accordance with local/national regulations (P501).
CA Liner 100
Factory Blended, High Strength, Calcium Aluminate Mortar
NET WT. 60 LBS. (27.2 KGS.)
YIELD:
One 60 lb. (27.2 kg) bag of CA Liner 100 mortar yields approximately 0.48 ft3 (0.014 m3) and will cover 5.76 ft2 (0.54 m2) at a 1.0-inch (25.4 mm) thickness. Allowance for waste must be made and will reduce coverage accordingly.
APPLICATION INFORMATION:
Prepare the surface to be repaired by removing all unsound concrete, dirt, dust and other debris using high pressure water and air blast excess water with an oil free air compressor providing a clean, saturated, surface-dry and sound substrate. Mix Parson CA Liner 100 mortar, using Parson approved mixing equipment, with approximately 0.80 to 1.00 gallons (3.03 to 3.79 liters) of potable water per 60 lb. (27.2 kg) bag. All of mixing water should be added to an approved mixing device first, the mixer should be started and Parson CA Liner 100 mortar added in a continuous manner. Apply Parson CA Liner 100 mortar, using Parson approved spray equipment, by low-pressure spraying (shotcreting) on vertical or overhead surfaces in thicknesses of 0.50 to 3.0 inches (12.7 to 76.2 mm).
STORAGE, HANDLING AND SHELF LIFE:
Material is to be kept in a dry, climate-controlled location outside of the elements until use. When onsite, material is to be kept dry and sheltered from extreme temperatures. When kept in a climate controlled, dry environment material is expected to maintain physical properties for up to a year after production.
Curing should be done in accordance with current Manufacturer recommendations.
Parson CA Liner 100 mortar is a one-component, calcium aluminate-based mortar which is formulated for industrial and professional use only and must be kept out of the reach of children. Observe all precautions found in Safety Data Sheets (SDS). Read all product labels and technical literature carefully before using.
DANGER!
|
|
|
Hazard Statement: Contact with wet mortar can burn eyes and skin. Permanent eye damage can result from eye contact. Dust from the dry material can cause severe irritation and possibly burns to the eyes and respiratory tract with coughing and nasal discharge. Repeated inhalation may cause cancer. Lung damage and possibly pulmonary edema can result from dust exposure. Skin contact may not cause immediate burning sensation.
Precautionary Statement: It is important to begin skin first-aid even if there is no immediate burning sensation. Repeated or prolonged skin contact may cause skin allergic reactions. Personnel responding to a spill of this material should wear appropriate personal protective equipment. If swallowed rinse mouth, do not induce vomiting. Immediately remove contaminated work clothing to prevent irritation. Rinse hair and skin with clean water. If inhalation occurs, move to fresh air. When handling, personal protective equipment including but not limited to as gloves, NIOSH-Approved dust respirator, safety glasses, steel toe boots and long sleeves should be worn at all times.
WARNING:
This product contains greater than 0.10% crystalline silica. Avoid breathing dust at all times. Always use a NIOSH-Approved dust respirator and use only with adequate ventilation to keep dust below permissible levels. Also contains cement and pozzolans. This product is injurious to eyes and may cause skin irritations. Avoid eye and skin contact, flush with clean water for at least 15 minutes. Consult a physician immediately. KEEP OUT OF THE REACH OF CHILDREN.
GeoLiner
Geopolymer Mortar
- Fully Structural
- Corrosion Resistant
- Environmentally Friendly
NET WT. 60 LBS. (27.2 KGS.)
YIELD:
One 60 lb. (27.2 kg) bag of GeoLiner® geopolymer mortar yields approximately 0.45 ft3 (0.013 m3) and will cover 5.4 ft2 (0.50 m2) at a 1.0-inch (25.4 mm) thickness. Allowance for waste must be made and will reduce coverage accordingly.
APPLICATION INFORMATION:
Prepare the surface to be repaired by removing all unsound concrete, dirt, dust and other debris using high pressure water and air blast excess water with an oil free air compressor providing a clean, saturated, surface-dry and sound substrate. Mix GeoLiner geopolymer mortar, using Parson approved mixing equipment, with approximately 0.49 to 0.59 gallons (1.85 to 2.23 liters) of potable water per 60 lb. (27.2 kg) bag. All of mixing water should be added to an approved mixing device first, the mixer should be started and GeoLiner geopolymer mortar added in a continuous manner. Apply GeoLiner geopolymer mortar, using Parson approved spray equipment, by low-pressure spraying (shotcreting) on vertical or overhead surfaces in thicknesses of 0.50 to 3.0 inches (12.7 to 76.2 mm).
STORAGE, HANDLING AND SHELF LIFE:
Material is to be kept in a dry, climate-controlled location outside of the elements until use. When onsite, material is to be kept dry and sheltered from extreme temperatures. When kept in a climate controlled, dry environment material is expected to maintain physical properties for up to a year after production.
Curing should be done in accordance with current Manufacturer recommendations.
Parson GeoLiner geopolymer mortar is a factory blended, one-component (just add water), eco-friendly, micro-fiber reinforced geopolymer mortar which is formulated for industrial and professional use only and must be kept out of the reach of children. Observe all precautions found in Safety Data Sheets (SDS). Read all product labels and technical literature carefully before using.
DANGER!
|
|
|
Hazard Statement: Contact with wet mortar can burn eyes and skin. Permanent eye damage can result from eye contact. Dust from the dry material can cause severe irritation and possibly burns to the eyes and respiratory tract with coughing and nasal discharge. Repeated inhalation may cause cancer. Lung damage and possibly pulmonary edema can result from dust exposure. Skin contact may not cause immediate burning sensation.
Precautionary Statement: It is important to begin skin first-aid even if there is no immediate burning sensation. Repeated or prolonged skin contact may cause skin allergic reactions. Personnel responding to a spill of this material should wear appropriate personal protective equipment. If swallowed rinse mouth, do not induce vomiting. Immediately remove contaminated work clothing to prevent irritation. Rinse hair and skin with clean water. If inhalation occurs, move to fresh air. When handling, personal protective equipment including but not limited to as gloves, NIOSH-Approved dust respirator, safety glasses, steel toe boots and long sleeves should be worn at all times.
WARNING:
This product contains greater than 0.10% crystalline silica. Avoid breathing dust at all times. Always use a NIOSH-Approved dust respirator and use only with adequate ventilation to keep dust below permissible levels. Also contains cement and pozzolans. This product is injurious to eyes and may cause skin irritations. Avoid eye and skin contact, flush with clean water for at least 15 minutes. Consult a physician immediately. KEEP OUT OF THE REACH OF CHILDREN.
MH Liner
Factory Blended, One Component, High Strength Cement Based Mortar
NET WT. 60 LBS. (27.2 KGS.)
YIELD:
One 60 lb. (27.2 kg) bag of MH Liner mortar yields approximately 0.51 ft3 (0.014 m3) and will cover 6.12 ft2 (0.57 m2) at a 1.0-inch (25.4 mm) thickness. Allowance for waste must be made and will reduce coverage accordingly.
APPLICATION INFORMATION:
Prepare the surface to be repaired by removing all unsound concrete, dirt, dust and other debris using high pressure water and air blast excess water with an oil free air compressor providing a clean, saturated, surface-dry and sound substrate. Mix Parson MH Liner mortar, using Parson approved mixing equipment, with approximately .70 to 1.0 gallons (2.64 to 3.78 liters) of potable water per 60 lb. (27.2 kg) bag. All mixing water should be added to an approved mixing device first, the mixer should be started and Parson MH Liner mortar added in a continuous manner. Apply Parson MH Liner mortar, using Parson approved spray equipment, by low-pressure spraying (shotcreting) on vertical or overhead surfaces in thicknesses of 0.50 to 3.0 inches (12.7 to 76.2 mm).
STORAGE, HANDLING AND SHELF LIFE:
Material is to be kept in a dry, climate-controlled location outside of the elements until use. When onsite, material is to be kept dry and sheltered from extreme temperatures. When kept in a climate controlled, dry environment material is expected to maintain physical properties for up to a year after production.
Curing should be done in accordance with current Manufacturer recommendations.
Parson MH Liner mortar is a one-component, Portland cement-based, high strength, fiber reinforced, shrinkage compensated mortar which is formulated for industrial and professional use only and must be kept out of the reach of children. Observe all precautions found in Safety Data Sheets (SDS). Read all product labels and technical literature carefully before using.
DANGER!
|
|
|
Hazard Statement: Contact with wet mortar can burn eyes and skin. Permanent eye damage can result from eye contact. Dust from the dry material can cause severe irritation and possibly burns to the eyes and respiratory tract with coughing and nasal discharge. Repeated inhalation may cause cancer. Lung damage and possibly pulmonary edema can result from dust exposure. Skin contact may not cause immediate burning sensation.
Precautionary Statement: It is important to begin skin first-aid even if there is no immediate burning sensation. Repeated or prolonged skin contact may cause skin allergic reactions. Personnel responding to a spill of this material should wear appropriate personal protective equipment. If swallowed rinse mouth, do not induce vomiting. Immediately remove contaminated work clothing to prevent irritation. Rinse hair and skin with clean water. If inhalation occurs, move to fresh air. When handling, personal protective equipment including but not limited to as gloves, NIOSH-Approved dust respirator, safety glasses, steel toe boots and long sleeves should be worn at all times.
WARNING:
This product contains greater than 0.10% crystalline silica. Avoid breathing dust at all times. Always use a NIOSH-Approved dust respirator and use only with adequate ventilation to keep dust below permissible levels. Also contains cement and pozzolans. This product is injurious to eyes and may cause skin irritations. Avoid eye and skin contact, flush with clean water for at least 15 minutes. Consult a physician immediately. KEEP OUT OF THE REACH OF CHILDREN.
