Structure Guard®-FM is a 100% solids epoxy mastic used to protect new infrastructure and to rehabilitate existing, damaged, infrastructure.
Structure Guard®-FM is a 100% solids epoxy mastic used to protect new infrastructure and to rehabilitate existing, damaged, infrastructure. Structure Guard-FM is best applied using a trowel.
Net Weight — 2.5 lbs (usable material)/cartridge
15 lbs (usable material)/case (6 cartridges)
Sq. ft. per gallon 250 mils 6.4 sq. ft.
Sq. ft. per 6 cartridge case 250 mils 9.12 sq. ft.
Concrete/Brick: Substrate surface must be Hydro Blasted at 5000 psi, removing any loose concrete or other material. Must be free of grease and oil. ALL SURFACES MUST BE DRY, CLEAN AND FREE FROM OIL, GREASE AND OTHER CONTAMINANTS!
Color – Green
Solids – 100% (no solvents)
Volatile Organic Compounds (VOCs) – 0
Thickness – 125 to 250 mils per coat
Number of Components – 2
Re-coat – 2 hours
Water Contact – 4 hours
Final Cure – 24 hours
Must be abraded with the equivalent of 36 grit sand paper after 24 hrs.
24 months unopened
10 minutes at 70°F (21°C)
2 to 1 in prepackaged cartridge. Use with 600 mil x 300 mil cartridge dispenser. Use only the material that the job requires, leaving virtually no wasted material.
Directly applied to substrate from static mixing tip. Use trowel or putty knife to smooth material.
Acetone. REFER TO SAFETY DATA SHEET FOR SAFETY AND HEALTH INFORMATION.
No harmful VOCs or odors. Disposable packaging and minimal waste.