Quadex® Quad-Flow is designed to provide high-strength, quick-setting invert rehabilitation mortar to work in unison with the Quadex family of repair products to form an abrasion-resistant repair while increasing the structural integrity of deteriorated pipe and culvert inverts.
Quadex® Quad-Flow is designed to provide high strength, quick setting invert rehabilitation mortar to work in unison with the Quadex family of repair products to form an abrasion-resistant repair while increasing the structural integrity of deteriorated pipe and culvert inverts. Quad-Flow has been developed to provide a flowable repair material, capable of being pumped into a host pipe to fill voids and repair damaged inverts with a quick setting, high strength mortar, reforming and reshaping damaged or missing inverts. The quick setting characteristics of the material allow crews to continue their work rehabilitating the host infrastructure mere hours after introduction of Quad-Flow.
Quad-Flow is supplied in 1,000 lb (454 kg) bulk bag.
One 1,000-lb. bag of Quad-Flow will yield approximately 7.42 cu. ft.
Prepare void to be filled by removing unsound concrete, dirt, dust, oil and other debris using high pressure (3,500 psi) water blasting and manual/mechanical removal.
Use approximately 13 to 14 gallons of potable water per 1,000 lb. bag of Quad-Flow. First add water to mixer, start mixer and add Quad-Flow until mortar is completely mixed.
Cure in accordance with manufacturer’s recommendations.
Quadex® warrants its products to be free of defects in material and workmanship. Quadex will replace any product proved to be defective when applied in accordance with manufacturer’s instructions. Quadex’s obligation shall be limited solely to such replacement. There are no other warranties by Quadex, expressed or implied.
Avoid eye contact or prolonged contact with skin. Wash thoroughly after use. Persons using Quadex Quad-Flow should wear necessary eye protection, dusk mask and rubber gloves. Read all product labels and technical literature.