Quadex® Quad-Clean removes cured resin from metal components such as tools and equipment. For best results, use an industrial grade ultrasonic cleaner with built-in heater.
Quad-Clean Resin Cleaning Solvent
Description
Quadex® Quad-Clean™ removes cured resin from metal components such as tools and equipment. For best results, use an industrial grade ultrasonic cleaner with built in heater.
Packaging
5 Gallon Pails (18.9 Liter Pail).
Storage
Store in dry environment between 40°-80°F (10°-26°C). No shelf life.
Procedure
Soak metal or Teflon components in Quad-Clean using a metal, glass or ceramic container until cured material softens. All wetted parts and lid must be metal (no plastic). Heat to 100-150°F. Only do this in a well ventilated area as heating the material increases solvent vapors. Remove hot parts with metal tongs. Periodically remove components from the solution and scrape off cured resin. Repeat as necessary. Once components are sufficiently clean, remove them, rinse with water or a mild solvent, and wipe down with a dry cloth. If there is no ultrasonic cleaner available, heat the Quad-Clean and components in a crock pot to 100-150°F. Follow directions and cautions above.
Safety
Avoid contact with eyes and skin, always use personal protective equipment in compliance with local regulations. Read the relevant Safety Data Sheet before use.
Disposal
Quad-Clean can be altered and reused. You can get liters at a paint store or use panty hose.
