Flex Guard®-FM flexible fiber-reinforced epoxy mastic is designed to be applied to metal and concrete substrates that experience movement. With a 100-150% elongation, it is ideal for freeze/thaw and structures that experience temperature fluctuation.
Flex Guard™-FM flexible fiber reinforced epoxy mastic is designed to be applied to metal and concrete substrates that experience movement. With a 100-150% elongation, it is ideal for freeze/thaw and structures that experience temperature fluctuation. Also used in the STAG Crack Injection System to cap cracks.
600×600 ml cartridge
1:1 in premeasured cartridge
Mechanical grinding is required prior to application of Flex Guard™-FM. Use 80 grit diamonds to achieve a CSP#3 profile. When used as a mastic: Hydro Blast at 5000 psi. When used as a crack sealer: Use grinder to remove any loose concrete. Smooth edges of crack. Plow crack out with a air blower. Substrate must be free of grease, standing water and other contaminants that may impede adhesion. Always check the surface for any bond inhibitors prior to application.
Remove nut and plug from the cartridge. Attach static mixing tip to cartridge. Place cartridge in dispensing gun. Pull trigger on dispensing gun and burn 2 oz into a cup. As a Mastic: Apply directly to substrate. Using a putty knife, smooth to desired finish. As a crack filler: Apply epoxy directly into crack until level with the floor. Allow to dry 2 hours before top-coating. When being used in conjunction with BGFL76: Use a putty knife spread Flex Guard-FM over the crack to cap it in epoxy leaving a 3-inch space for epoxy ports to be applied. Apply Flex Guard-FM to the outside edge of the port. No Flex Guard-FM should block the center passage of the port.
Acetone or MEK
Flex Guard-FM contains Amines that can be harmful to skin and eyes. If contact with skin or eyes rinse thoroughly with water. See SDS for full instructions. Always consult a medical physician with concerns.