Very flexible, light-weight PE fabric with PVC coating and specially fused with an overlapped, taped joint. For use in open-end liner (blind-shot) and pull-in-place applications. Once pressurized inside of the liner, the flexible tube will press the liner against the host pipe during the curing process.
Very flexible, light-weight PE fabric with PVC coating and specially fused with an overlapped, taped joint. For use in Open-End liner (Blind-Shot) and Pull-In-Place applications. Once pressurized inside of the liner, the flexible tube will press the liner against the host pipe during the curing process.
2″ to 6″
• 165 and 330 ft. lengths in stock (+/-)
• Longer lengths available
• Open-ended (Blind Shot) inverted liner
• Pull-In-Place
• Hot water, steam, or ambient curing
• Translucent tube for placement
• Guide tube
Installation Air Pressure – 5 to 7psi (may need additional pressure to invert around bends).
Avoid extremes of temperature. Freezing may cause the coating structure to degrade locally, especially areas where the coating is in tension or compression – at bends and edges, and immediately adjacent to seam welds. Recommended storage temperature 40°F – 95°F. Shelf life at this temperature: in excess of 1 year.
Avoid prolonged contact with solvents and chemicals.
